›› Iron Filter FAQ |
|||
![]() |
|
| Home · Company Information · Contact Us · My Account · Cart · Checkout | |
|
Iron Filter Frequently Asked Questions
I have a tank fill with some nasty looking liquid. The tank is as big as my brine tank. It has a small hose that goes to one of my conditioner tanks while the brine tank has a hose that goes to the other conditioner tank. I am going to guess the "nasty" liquid is water mixed with Potassium Permanganate. The tank must be connected to a "Greensand" tank ( used to help remove Iron and Hydrogen Sulfide Odor ). The valve should pull out about 1" of the "nasty" ( purple ) liquid each night it regenerates. When the tanks is almost empty, 3 lbs. of Potassium Permanganate should be added, then the tank filled with water. Don't let the Potassium Permanganate get on you or your clothes. It turns things Brown. <> I also have Potassium Manganate and TReg, but dont know where and how much to add. * I explained the Potassium Permanganate, but I'm not sure what "TReg" is??? May be something that is added to the salt to help clean the resin ( like Iron Out, or ResUp ). The water softener will take out Iron ( like the Greensand Filter ), but high levels ( over 2 ppm ) require that cleaner be used with the Salt. Note: The Iron Filter is High maintenance. The Injectors get clogged and need to be frequently cleaned, See the bottom of this link for help with Autotrol Valves: Autotrol Service Hints OR replaced ( either a Red "C" Injector or Green "D" injector is used on Autotrol Valves, which I am assuming you have ). See: Injectors For Autotrol Valves OR Fleck models normally used the # 2 PVC gray Injector Set ( Nozzle & Throat ) See: Injectors For Fleck Valves Let me know how I can be of further assistance. Good Luck, Andrew |
|||||||||||||||||||||||||||||
| Home · Company Information · Contact Us · My Account · Cart · Checkout | |||
|
|||